The paint may take several days to dry on Azek, but the coverage is usually solid and clean when it finally cures, depending on how well you applied it. The coat of acrylic latex paint provides the desired coverage without the need for additional layers. When painting Azek trim, you need to apply a single coat of paint with no primer. However, this non-moisture absorbing property means the freshly painted boards may take slightly longer to cure-anywhere from two days to two or three weeks. The important thing here is to obtain your acrylic latex paint from a quality manufacturer.Īzek material absorbs no moisture, so you can expect the paint to hold a lot longer without requiring a touch-up. Once you are ready to apply a fresh coat of paint on your Azek, use a high-quality natural-bristled brush to apply an even layer of 100 acrylic latex paint to the surface. You can also spray your paint.Īzek doesn’t require priming you need to apply the topcoats directly to the freshly cleaned cellular PVC trim. After cleaning, you may consider wiping down the board with a dry lint-free rag to dry it and get it ready for painting. A lint-free cloth dampened with denatured alcohol should help get any grease, dirt, and grime off the surface.Īlternatively, you could clean the surface with soap and water instead of denatured alcohol.

Step 1: Preparing Azek for paintingĪzek Trim or Moulding tends to pick up dirt and dust, so you want to make sure you wipe down the surface with denatured alcohol to clean and properly prepare it before painting. Paint (we recommend 100% acrylic paint)įollow these 2-step Azek painting instructions for the best results.However, you must pay attention to the material’s specific requirements to get it right. Painting an Azek product is a straightforward process. But if you want to paint Azek, acrylic latex paints are your best option for painting over Azek. Does Azek Need to be PaintedĪzek is a synthetic material, and does not require painting for maintanance. So you want to try and go as light as possible with your paint color choice to minimize heating and possible warping. The dark color will attract more heat and cause the material to expand. Therefore, a dark-colored paint on Azek would have the same effect as moisture on wood. The Azek material expands and contracts with heat since it’s made of plastic (PVC). However, if you must use a dark-colored paint with an LRV below 55 on Azek, ensure it’s a select vinyl-safe color with special heat reflective properties. No, Azek requires using a light color with a light reflective value (LRV) of at least 55. If you choose to paint a dark color whose Light Reflective Value is below 55, make sure you use special heat reflective paint. However, if you choose to paint Azek a custom color, you must use 100% acrylic latex paint with a color bearing a Light Reflective Value (LRV) of 55 or higher. Yes, you can paint Azek, but it doesn’t necessarily require painting.

Azek paint pro trim